Tips How to care for HP To Be Always Safe and Not Fast Damaged.

Currently HP is an absolute item owned by each individual, be it elementary school children until the elderly need it. But do you know how to keep HP always safe and not easily damaged, the following tips how to care for hp in order to always be safe and not quickly broken, hope this helps:

1.When purchasing new, must have cardboard, guidebook and warranty card and others. Keep this well, of course, one day will be needed.

2.Do not do anything that may cause loss of warranty such as, open your own machine, seal broken or deliberately destroyed and so forth.

3.Note IMEI number and PIN Code or PUK number. Just in case when needed.

4. Avoid shocks that are too loud or too often let alone banged objects with hard or fall.

5.Make the charging correctly:

-Remove the HP holster when present.

-Put a charger when the HP battery is really "low-batt".

-Turn off HP before in cas.

-Connect HP with charger and charger.

-Remove immediately when battery is full.

-Reduce or avoid caring in the vehicle because the generated electricity is not as stable.

6.Clean the connector pins in the HP eg cleaning the battery connector, SIM card slot and also the SIM card on a regular basis, 3 months or 6 months. Clean the connector with a cotton-bud or tissue. Do not use fluids if you are inexperienced.

7. Save the battery by opening the application when needed only and close again when already using the application.

8Turn off HP when traveling out of town. This may only apply to HP CDMA and restart it when it arrives in the destination City.

9.Bila your battery drop, you try to overcome by wrapping the HP battery with plastic and fastening tightly, then enter the freezer for 12 hours. After that remove from the freezer let stand at room temperature until the state of normal battery temperature. After that plug in HP and turn it on.

9. Avoid HP LCD from extreme heat and cold temperatures and LCDs should not be exposed to excess pressure.

10. Keep away from water, do not let your HP water. If you happen to do the following and do not panic:

-Displays HP, if it's dead do not try to turn it on.

-Lift the battery.

-Shut your HP to get the water out (do not loud).

-Dry with a tissue, fan or vacum cleaner. Lalukan until it looks dry.

-Sammer for 1 to 2 days, until inside the HP is really no water.

-When you want to fast, dry with the fan for 5 hours and do not turn it on for 12 hours.

-Ret back and plug the battery, try turning on.

-When still no flame try to take your HP to the official service.

12. Do not disassemble SIM pairs too often, because that will damage the SIM slot.